Repository navigation
Conversation
…witch username to mbchars.
mbchars.py puts the remix's printed parts together from its STLs (no assembled file exists): the three front sections where the joint bars' 36 mm insert pitch puts their lug holes, the covers on the sixteen inserts, the USB retainer on its boss and the stands on the bottom edge, each step checked against the README (410.28 x 176.16 x 42 mm), the board's encoder grid, the 320 x 160 mm panel and boolean overlaps. assemble.mjs learns ledTurn (the panel lies the long way here) and knobLook (the official knob, printed white), and lib/looks.mjs pla_orange, the 3MF's own #F46B16. The other three models rebuild byte-identical; the new one is 380 KB. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QGBYm64PnfneJq2ZDJ8Gs7
…horizontal desktop one The card is the remix README's own facts and photos (resized to 1200 px), the preview shows the device in the case, and the switch is four tabs, two by two on a phone. A case too wide for the view at the one scale (this one, 41 cm across on a desktop's tall canvas) is drawn smaller by as little as keeps it clear of the arrows; every case still fits at the one scale on a phone, and the three upright ones on a desktop. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QGBYm64PnfneJq2ZDJ8Gs7
…review case Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QGBYm64PnfneJq2ZDJ8Gs7
…al-desktop hardware+web: mbchars' horizontal desktop case as the third remix, and the fourth case in /build's 3D preview (supersedes engmung#488)
Found by accident, with the PCBs ordered ten minutes later; the 3D printer came a month on, bought for the case, and the case was the first thing it printed. Moscow was given, so the pin is on the city. The blurb stops at the printer. The maker's note about making the patterns with AI is left out on purpose, and there are no pronouns for the maker: the message does not say. Three photos: a pixel-art Mount Fuji beside a modular synth, a pixel-art frog pond seen from above, and a cat plush in front of the panel. groups.test.ts pins the number of countries on the real map; Russia is new, so 11 becomes 12. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
On the Build tab the name on the case's tab (Official, Besoiobiy, SimonePDA, mbchars) stands over the device, on the build map's dark highlight. It follows the pick at once, as the tab does, and reads Official for a case whose model did not load. The knob hint moves under it while it is up. Changelog also gets the line for the arrows. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ZuperZuche's build joins the map; the 3D preview names whose case it is
…e guide's Flash chapter, and the README is new from its first screen The Play guide's 01 Flash (and /ko) puts hold BOOT, tap RST before Flash Patternflow on every first flash, assumes the Wi-Fi step after "Installation complete!" usually does not come (RST, Flash Patternflow again, Connect to Wi-Fi), and ends on the panel's own patternflow-xxxx network at 192.168.4.1 for when that does not take; the device simulator draws the NETWORK screen's hotspot. The Build guide's flash card, the Pattern tab's notes and the breadboard page give the same order. The bare /flash, which the device's Update page and every release's FLASHING.md point at, redirects to /guide/play#flash; /flash/manifest.json and /flash/bin/* are untouched. flash.test.ts pins the card order and anchors. The README opens with a one-line definition, the hero, the photosensitivity warning, four doors (Build, Play, Make patterns, Add sound) and First light; the story, community, facts and editions follow, shorter. The docs that give the first flash (firmware/README.md, PATTERN_GUIDE.md, SUPPORT.md, docs/assembly/) say the same order, the indexes list the guide pages, the three case remixes and the bundles that exist, and stale wording (the custom slots, "variant", the dead /flash page) is gone. CONTRIBUTING.md gets a row for the interactive guide's copy, and the pull request template asks for the row and the link check. From #7 (caaf2c1). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01VaFtEmtx2AkdH1wnbQpV3Z
…rst light follows the build The opening is L1 + L2 + L3 from docs/manifesto.md (Paik moves to Where it began, in L5's own words), with Play one in your browser, Build one and Get one assembled under the badges. First light moves below the build, gains the steps it was missing (unplug before seating, Origin as the sign of success, Format storage on the first Basics install) and states the J4 rule as data never power on the DevKit's ports. Stale lines are corrected against the repo: sound and MQTT shipped in editions, MIDI arrived in 3.9.0, 3.10.5 fixed four requests, and the photosensitivity warning is the manifesto's full text. From #8 (bfc4b22). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01VaFtEmtx2AkdH1wnbQpV3Z
… campaign is still open BUILD_GUIDE §8.1 now goes download mode first (hold BOOT, tap RST), Flash Patternflow, the Wi-Fi as a second go after RST, the DevKit seated with the power bank unplugged, then the panel's own patternflow-xxxx network (K2 shows its name before the hotspot is up), then the Basics pack: the Play guide's 01 Flash card for card. §7 no longer seats the DevKit before it has firmware, so it is Wiring, and 7.4 names the step that powers up. The README's First light points at §8 again, and Crowd Supply reads as it stands: past its goal, open until 15 October; the 200% figure stays in the dated timeline. Besoiobiy's case README cites the renumbered steps. From #9 (16eca1b). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01VaFtEmtx2AkdH1wnbQpV3Z
…w-upstream-docs-r4eab8 docs, web: the first flash starts in download mode everywhere, /flash goes to the guide, and the README is rewritten
**New journal post** — `fine` (ko + en), published 2026-10-13. Not highlighted. Putting the blog off but not past a week, a hand-written paper diary after months, being selected for Anthropic's Claude startup program, reading and music slipping, AI making time feel more pressing, the interview shoot for the introduction video at the startup center studio, the funding ending in two days, the apartment renovation that still hasn't happened, the visually impaired artist enjoying the Patternflow at the Seoul Station teardown, and parts bought for a workshop. **Two photos**, resized to 2000 px on the long side: - the interview studio (faces already pixelated in the source), after the interview paragraph; also the cover, since the author prefers not to lead with a face - the Seoul Station exhibition before the teardown, after the teardown paragraph ## Notes - The draft pasted the Korean section twice in `_temp/blog.md`; the second copy was clean and is the one used, so the text matches the English paragraph for paragraph (13 each). - Verified against the dev server: both language versions return 200, both images serve, and the index hero is this post with the interview photo as its thumbnail. Not in the highlighted rows. - `dev` and `main` were identical before this commit, so the PR carries only the post. 🤖 Generated with [Claude Code](https://claude.com/claude-code) BODY journal: new post "fine" Post (ko+en), not highlighted: the paper diary, the Claude startup program, the interview shoot for the introduction video, the funding ending in two days, the apartment still unrenovated, and the visually impaired artist enjoying the Patternflow at the teardown. Two photos at 2000 px: the interview studio (faces already pixelated), also the cover, and the exhibition before the teardown. The draft pasted the Korean section twice; the clean second copy is used. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Journal: new post 'Fine'
…1790 web: changes from the Patternflow-lab workshop fork
…ation The AI gallery and the Gemini key left Pattern Lab (engmung#510). The naming table now lists what the studio has: layers of code, pixel art and text. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…on and the Gemini client The card on /pattern listed batch generation, and AGENTS.md called lib/ai/ the Gemini client; both left Pattern Lab in engmung#510. lib/ai/ now holds only the colour model and the prompt Copy prompt puts on the clipboard. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…g-after-510 docs, web: manifesto, /pattern card and AGENTS.md stop naming batch generation
…ilt on dev The Cloudflare Workers setup of the workshop fork, re-applied on top of engmung/Patternflow dev: package-lock.json regenerated there (dev has @types/node ^22), with @opennextjs/cloudflare 1.20.12 and wrangler 4.151.0 pinned to the versions the fork built and checked. From #250 (6384a41). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
engmung
pushed a commit
to engmung/Patternflow
that referenced
this pull request
Oct 25, 2026
From Patternflow-lab#250 (6384a41). Rebuilt on dev in Patternflow-lab#253 at d499b57
Author
|
engmung#514 에 실려 원래 레포 dev·main 에 들어갔어요(10-25). 다시 짠 브랜치는 이제 쓸 곳이 없어 닫아요. |
This was referenced Oct 25, 2026
Merged
Merged
[DONE] 연구 페이지에 격자 글꼴과 숨은 낱말, 한글 음절 주행계를 포함한 타이포 다섯과 윌킨슨 다항식을 포함한 수학 다섯이 서고, 셋뿐이던 지도 칸 둘에 넷째가 선다
#329
Merged
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
PC 세션 — 포크 PR #250(patternflow.work 를 Cloudflare Workers 로)을 원래 레포 dev 위에 다시 짰어요.
hub upstream이web/package-lock.json하나가 겹쳐 멈췄어요(원래 레포 dev 는@types/node ^22, 포크는^20이라 잠금 파일이 616줄 달라요).한 일
@opennextjs/cloudflare1.20.12 ·wrangler4.151.0 은 포크가 빌드하고 확인한 판으로 고정했어요.hasown2.0.3 → 2.0.4 ·side-channel1.1.0 → 1.1.1)뿐이고, 더해진 283개는 OpenNext · wrangler 의 것, 빠진 둘은@vercel/analytics·@vercel/speed-insights예요.증거
Access-Control-Allow-Origin: *) ·/_next/imageWebP 가 다 같았어요.Changelog
Web
web/DEPLOY-cloudflare.mdhas the move and the way back.🤖 Generated with Claude Code