request 2 Target for Synerduino boards

src/main/target/SYNERDUINOH7/CMakeLists.txt

@@ -0,0 +1 @@
+target_stm32h743xi(SYNERDUINOH7 HSE_MHZ 25 SKIP_RELEASES)

src/main/target/SYNERDUINOH7/target.c

@@ -0,0 +1,56 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include <stdbool.h>
+#include <platform.h>
+#include "drivers/bus.h"
+#include "drivers/io.h"
+#include "drivers/pwm_mapping.h"
+#include "drivers/timer.h"
+#include "drivers/pinio.h"
+
+#include "drivers/sensor.h"
+#include "drivers/timer_def_stm32h7xx.h"
+
+timerHardware_t timerHardware[] = {
+    DEF_TIM(TIM3, CH3, PB0, TIM_USE_OUTPUT_AUTO, 0, 0),   // S1
+    DEF_TIM(TIM3, CH4, PB1, TIM_USE_OUTPUT_AUTO, 0, 1),   // S2
+
+    DEF_TIM(TIM5, CH1, PA0, TIM_USE_OUTPUT_AUTO, 0, 2),   // S3  
+    DEF_TIM(TIM5, CH2, PA1, TIM_USE_OUTPUT_AUTO, 0, 3),   // S4
+    DEF_TIM(TIM5, CH3, PA2, TIM_USE_OUTPUT_AUTO, 0, 4),   // S5
+    DEF_TIM(TIM5, CH4, PA3, TIM_USE_OUTPUT_AUTO, 0, 5),   // S6
+
+    DEF_TIM(TIM4, CH1, PD12, TIM_USE_OUTPUT_AUTO, 0, 6),   // S7
+    DEF_TIM(TIM4, CH2, PD13, TIM_USE_OUTPUT_AUTO, 0, 7),   // S8
+    DEF_TIM(TIM4, CH3, PD14, TIM_USE_OUTPUT_AUTO, 0, 0),   // S9
+    DEF_TIM(TIM4, CH4, PD15, TIM_USE_OUTPUT_AUTO, 0, 0),   // S10 DMA_NONE
+
+    DEF_TIM(TIM15, CH1, PE5, TIM_USE_OUTPUT_AUTO, 0, 0),   // S11
+    DEF_TIM(TIM15, CH2, PE6, TIM_USE_OUTPUT_AUTO, 0, 0),   // S12 DMA_NONE
+
+    DEF_TIM(TIM1,  CH1, PA8,  TIM_USE_LED, 0, 9),    // LED_2812
+    DEF_TIM(TIM2,  CH1, PA15, TIM_USE_BEEPER, 0, 0),  // BEEPER PWM
+
+    // DEF_TIM(TIM8,  CH2, PC7,  TIM_USE_PPM, 0, 0),   // RX6 PPM
+    // DEF_TIM(TIM8,  CH1, PC6,  TIM_USE_ANY, 0, 0),   // TX6 SoftwareSerial   
+    // DEF_TIM(TIM16, CH1, PB8,  TIM_USE_ANY, 0, 0),   // RX4
+    // DEF_TIM(TIM17, CH1, PB9,  TIM_USE_ANY, 0, 0),   // TX4
+};
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);

src/main/target/SYNERDUINOH7/target.h

@@ -0,0 +1,263 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ ***Base of the Matek H743 Modded** 
+ */
+
+
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "SYNH743"
+#define USBD_PRODUCT_STRING     "SYNERDUIN0H7"
+
+
+#define LED0                    PE3
+#define LED1                    PE4
+
+#define BEEPER                  PA15
+#define BEEPER_INVERTED
+#define BEEPER_PWM_FREQUENCY    2500
+
+// *************** SPI1 Flash BLACKBOX  ******************
+//#define USE_SPI_DEVICE_1
+//#define SPI1_SCK_PIN            PB3
+//#define SPI1_MISO_PIN           PB4
+//#define SPI1_MOSI_PIN           PD7
+
+//#define USE_BLACKBOX
+//#define USE_FLASHFS
+
+//#define USE_FLASH_W25N01G
+//#define W25N01G_SPI_BUS         BUS_SPI1
+//#define W25N01G_CS_PIN          PD6 
+
+//#define USE_FLASH_W25Q64
+//#define W25Q64_SPI_BUS          BUS_SPI1
+//#define W25Q64_CS_PIN           PD6
+
+//#define USE_FLASH_M25P16
+//#define M25P16_SPI_BUS          BUS_SPI1
+//#define M25P16_CS_PIN           PD6 
+
+
+// *************** SPI1 Flash BLACKBOX  *********Might Affect UART2********
+//#define USE_SPI_DEVICE_1
+//#define SPI1_SCK_PIN            PB3
+//#define SPI1_MISO_PIN           PB4
+//#define SPI1_MOSI_PIN           PD7
+
+//#define USE_BLACKBOX
+//#define USE_FLASHFS
+
+//#define USE_FLASH_W25N01G
+//#define W25N01G_SPI_BUS         BUS_SPI1
+//#define W25N01G_CS_PIN          PD6 
+
+//#define USE_FLASH_W25Q64
+//#define W25Q64_SPI_BUS          BUS_SPI1
+//#define W25Q64_CS_PIN           PD6
+
+//#define USE_FLASH_M25P16
+//#define M25P16_SPI_BUS          BUS_SPI1
+//#define M25P16_CS_PIN           PD6 
+
+//#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+// *************** IMU generic ***********************
+//#define USE_DUAL_GYRO
+// *************** SPI2 IMU1 ******************************
+//#define USE_SPI_DEVICE_2
+//#define SPI1_SCK_PIN            PB13
+//#define SPI1_MISO_PIN           PB14
+//#define SPI1_MOSI_PIN           PB15
+
+//#define USE_IMU_ICM42605
+
+//#define IMU_ICM42605_ALIGN      CW90_DEG_FLIP
+//#define ICM42605_SPI_BUS        BUS_SPI1
+//#define ICM42605_CS_PIN         PB12
+
+//#define USE_IMU_ICM20689
+
+//#define IMU_ICM20689_ALIGN      CW90_DEG_FLIP
+//#define ICM20689_SPI_BUS        BUS_SPI1
+//#define ICM20689_CS_PIN         PB12
+
+// *************** SPI1 IMU0 ******************************
+#define USE_SPI
+#define USE_SPI_DEVICE_1
+#define SPI2_SCK_PIN            PA5 // PB13 
+#define SPI2_MISO_PIN           PA6 // PB14
+#define SPI2_MOSI_PIN           PA7 // PB12
+
+#define USE_IMU_MPU6000
+
+#define IMU_MPU6000_ALIGN       CW90_DEG
+#define MPU6000_SPI_BUS         BUS_SPI1 // BUS_SPI2
+#define MPU6000_CS_PIN          PA4 // PB12
+
+#define USE_IMU_MPU6500
+
+#define IMU_MPU6500_ALIGN       CW90_DEG
+#define MPU6500_SPI_BUS         BUS_SPI1 // BUS_SPI2
+#define MPU6500_CS_PIN          PA4 // PB12
+
+#define USE_IMU_MPU9250
+
+#define IMU_MPU9250_ALIGN       CW90_DEG
+#define MPU9250_SPI_BUS          BUS_SPI1 // BUS_SPI2
+#define MPU9250_CS_PIN          PA4 // PB12
+
+#define USE_IMU_BMI160
+
+#define IMU_BMI160_ALIGN       CW270_DEG
+#define BMI160_SPI_BUS          BUS_SPI1 // BUS_SPI2
+#define BMI160_CS_PIN          PA4 // PB12
+
+#define USE_IMU_BMI270
+
+#define IMU_BMI270_ALIGN       CW270_DEG
+#define BMI270_SPI_BUS          BUS_SPI1 // BUS_SPI2
+#define BMI270_CS_PIN          PA4 // PB12
+
+// *************** SPI4 OSD **********Some readon the SPI OLED was there***********
+//#define USE_SPI_DEVICE_4
+//#define SPI4_SCK_PIN            PE12
+//#define SPI4_MISO_PIN           PE13
+//#define SPI4_MOSI_PIN           PE14
+
+//#define USE_MAX7456
+//#define MAX7456_SPI_BUS         BUS_SPI4
+//#define MAX7456_CS_PIN          PE11
+
+// *************** I2C /Baro/Mag *********************
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C1_SCL                PB6
+#define I2C1_SDA                PB7
+
+#define USE_I2C_DEVICE_2
+#define I2C2_SCL                PB10
+#define I2C2_SDA                PB11
+//** BARO **//
+#define USE_BARO
+#define BARO_I2C_BUS            BUS_I2C2
+#define USE_BARO_BMP085
+#define USE_BARO_BMP280
+#define USE_BARO_MS5611
+#define USE_BARO_DPS310
+#define USE_BARO_SPL06
+//** MAG **//
+#define USE_MAG
+#define MAG_I2C_BUS             BUS_I2C1
+#define USE_MAG_ALL
+//** TEMP **//
+#define TEMPERATURE_I2C_BUS     BUS_I2C2
+#define PITOT_I2C_BUS           BUS_I2C2
+//** RANGE **//
+#define USE_RANGEFINDER
+#define RANGEFINDER_I2C_BUS     BUS_I2C1
+
+// *************** UART *****************************
+#define USE_VCP
+
+#define USE_UART1
+#define UART1_TX_PIN            PA9
+#define UART1_RX_PIN            PA10
+
+#define USE_UART2
+#define UART2_TX_PIN            PD5
+#define UART2_RX_PIN            PD6
+
+#define USE_UART3
+#define UART3_TX_PIN            PD8
+#define UART3_RX_PIN            PD9
+
+#define USE_UART4
+#define UART4_TX_PIN            PB9
+#define UART4_RX_PIN            PB8
+
+#define USE_UART6
+#define UART6_TX_PIN            PC6
+#define UART6_RX_PIN            PC7
+
+#define USE_UART7
+#define UART7_TX_PIN            PE8
+#define UART7_RX_PIN            PE7
+
+#define USE_UART8
+#define UART8_TX_PIN            PE1
+#define UART8_RX_PIN            PE0
+
+//#define USE_SOFTSERIAL1
+//#define SOFTSERIAL_1_TX_PIN      PC6  //TX6 pad
+//#define SOFTSERIAL_1_RX_PIN      PC6  //TX6 pad
+
+#define SERIAL_PORT_COUNT       8
+
+#define DEFAULT_RX_TYPE         RX_TYPE_SERIAL
+#define SERIALRX_PROVIDER       SERIALRX_CRSF
+#define SERIALRX_UART           SERIAL_PORT_USART6
+
+// *************** SDIO SD BLACKBOX*******************
+#define USE_SDCARD
+#define USE_SDCARD_SDIO
+#define SDCARD_SDIO_DEVICE      SDIODEV_1
+#define SDCARD_SDIO_4BIT
+
+#define ENABLE_BLACKBOX_LOGGING_ON_SDCARD_BY_DEFAULT
+
+// *************** ADC *****************************
+#define USE_ADC
+#define ADC_INSTANCE                ADC1
+
+#define ADC_CHANNEL_1_PIN           PC0  //ADC123 VBAT1
+#define ADC_CHANNEL_2_PIN           PC1  //ADC123 CURR1
+#define ADC_CHANNEL_3_PIN           PC5  //ADC12  RSSI
+#define ADC_CHANNEL_4_PIN           PC4  //ADC12  AirS
+//#define ADC_CHANNEL_5_PIN           PA4  //ADC12  VB2
+//#define ADC_CHANNEL_6_PIN           PA7  //ADC12  CU2
+
+#define VBAT_ADC_CHANNEL            ADC_CHN_1
+#define CURRENT_METER_ADC_CHANNEL   ADC_CHN_2
+#define RSSI_ADC_CHANNEL            ADC_CHN_3
+#define AIRSPEED_ADC_CHANNEL        ADC_CHN_4
+
+// *************** PINIO ***************************
+#define USE_PINIO
+#define USE_PINIOBOX
+#define PINIO1_PIN                  PD10  // VTX power switcher
+#define PINIO2_PIN                  PD11  // 2xCamera switcher
+
+// *************** LEDSTRIP ************************
+#define USE_LED_STRIP
+#define WS2811_PIN                  PA8
+
+#define DEFAULT_FEATURES            (FEATURE_TELEMETRY | FEATURE_CURRENT_METER | FEATURE_VBAT | FEATURE_TX_PROF_SEL | FEATURE_BLACKBOX)//FEATURE_OSD | 
+#define CURRENT_METER_SCALE         250
+
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD 0xffff
+#define TARGET_IO_PORTE 0xffff
+
+#define MAX_PWM_OUTPUT_PORTS        14
+#define USE_DSHOT
+#define USE_ESC_SENSOR
+

src/main/target/SYNERDUINOH7A/CMakeLists.txt

@@ -0,0 +1 @@
+target_stm32h743xi(SYNERDUINOH7A HSE_MHZ 25 SKIP_RELEASES)

src/main/target/SYNERDUINOH7A/config.c

@@ -0,0 +1,28 @@
+/*
+ * This file is part of Cleanflight.
+ *
+ * Cleanflight is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Cleanflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Cleanflight.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+#include "platform.h"
+
+#include "fc/fc_msp_box.h"
+
+#include "io/piniobox.h"
+
+void targetConfiguration(void)
+{
+    pinioBoxConfigMutable()->permanentId[0] = BOX_PERMANENT_ID_USER1;
+}