zephyr-cp: add the MacroPad RP2040

ports/zephyr-cp/boards/adafruit/macropad_rp2040_zephyr/autogen_board_info.toml

@@ -0,0 +1,136 @@
+# This file is autogenerated when a board is built. Do not edit. Do commit it to git. Other scripts use its info.
+name = "Adafruit Industries LLC Adafruit MacroPad RP2040"
+
+[modules]
+__future__ = true
+_bleio = false
+_eve = false
+_pew = false
+_pixelmap = false
+_stage = false
+adafruit_bus_device = true
+adafruit_pixelbuf = false
+aesio = true
+alarm = false
+analogbufio = false
+analogio = false
+atexit = false
+audiobusio = false
+audiocore = false
+audiodelays = false
+audiofilewriter = false
+audiofilters = false
+audiofreeverb = false
+audioi2sin = false
+audioio = false
+audiomixer = false
+audiomp3 = false
+audiopwmio = false
+audiospeed = false
+aurora_epaper = false
+bitbangio = true
+bitmapfilter = true # Zephyr board has busio
+bitmaptools = true # Zephyr board has busio
+bitops = false
+board = true # Always enabled
+busdisplay = true # Zephyr board has busio
+busio = true # Zephyr board has busio
+camera = false
+canio = false
+codeop = false
+countio = false
+digitalio = true
+displayio = true # Zephyr board has displayio
+dotclockframebuffer = false
+dualbank = false
+emmcio = false
+epaperdisplay = true # Zephyr board has busio
+floppyio = false
+fontio = true # Zephyr board has busio
+fourwire = true # Zephyr board has busio
+framebufferio = true # Zephyr board has busio
+frequencyio = false
+getpass = true
+gifio = true # Zephyr board has busio
+gnss = false
+hardwarekey = false
+hashlib = true
+hmac = false
+hostnetwork = false
+i2cdisplaybus = true # Zephyr board has busio
+i2cioexpander = false
+i2ctarget = false
+imagecapture = false
+ipaddress = false
+is31fl3741 = false
+jpegio = true # Zephyr board has busio
+keypad = false
+keypad_demux = false
+locale = false
+lvfontio = true # Zephyr board has busio
+math = true
+max3421e = false
+mcp4822 = false
+mdns = false
+memorymap = false
+memorymonitor = false
+microcontroller = true
+mii = false
+mipidsi = false
+msgpack = true
+neopixel_write = false
+nvm = true # Board has NVM partition
+onewireio = false
+os = true
+paralleldisplaybus = false
+picogame = false
+ps2io = false
+pulseio = false
+pwmio = false
+qrio = false
+qspibus = false
+rainbowio = true
+random = true
+rclcpy = false
+rgbmatrix = false
+rotaryio = true # Zephyr board has rotaryio
+rtc = false
+sdcardio = true # Zephyr board has busio
+sdioio = false
+sharpdisplay = true # Zephyr board has busio
+socketpool = false
+spitarget = false
+ssl = false
+storage = true
+struct = true
+supervisor = true
+synthio = false
+terminalio = true # Zephyr board has busio
+tilepalettemapper = true # Zephyr board has busio
+time = true
+touchio = false
+traceback = true
+uheap = false
+usb = false
+usb_audio = false
+usb_cdc = true
+usb_hid = true
+usb_host = false
+usb_host_audio = false
+usb_host_bulk = false
+usb_midi = false
+usb_video = false
+ustack = false
+vectorio = true # Zephyr board has busio
+warnings = true
+watchdog = true # Zephyr board has watchdog
+wifi = false
+zephyr_display = true # Zephyr board has zephyr_display
+zephyr_kernel = false
+zlib = true
+# extmod modules shared with MicroPython
+asyncio = true
+binascii = true
+json = true
+re = true
+select = true

ports/zephyr-cp/boards/adafruit/macropad_rp2040_zephyr/board.conf

@@ -0,0 +1,12 @@
+CONFIG_GPIO=y
+
+# Package pin map for the RP2040 QFN-56 used by this board.
+CONFIG_IOBROKER_PACKAGE_RP2040_QFN56=y
+
+# Enable the SH1106 OLED via the Zephyr display subsystem
+CONFIG_DISPLAY=y
+
+# No Zephyr UART console by default (see board.overlay), so SCL/SDA are free
+# for I2C. A CONSOLE=1 build turns it back on in console.conf.
+CONFIG_UART_CONSOLE=n
+CONFIG_LOG_BACKEND_UART=n

ports/zephyr-cp/boards/adafruit/macropad_rp2040_zephyr/board.overlay

@@ -0,0 +1,32 @@
+/* Partition layout is owned by the mcuboot fork (dts/adafruit/adafruit_macropad_rp2040.dtsi)
+ * and applied to this image by sysbuild. This overlay only adds board/app config. */
+#include "../../../app.overlay"
+
+/* Free the key and encoder pins for keypad and rotaryio. */
+/ {
+	keys {
+		status = "disabled";
+	};
+
+	encoder {
+		status = "disabled";
+	};
+};
+
+/* No Zephyr console by default, so SCL/SDA (GPIO21/20) are free for I2C0. A
+ * CONSOLE=1 build puts the console back on UART1 (console.overlay). */
+/ {
+	chosen {
+		/delete-property/ zephyr,console;
+		/delete-property/ zephyr,shell-uart;
+	};
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+/* The zephyr_i2c label makes this board.STEMMA_I2C as well as board.I2C. */
+zephyr_i2c: &i2c0 {
+	status = "okay";
+};

ports/zephyr-cp/boards/adafruit/macropad_rp2040_zephyr/circuitpython.toml

@@ -0,0 +1,39 @@
+CIRCUITPY_BUILD_EXTENSIONS = ["uf2"]
+
+# Non-Zephyr build of the same board; nvm and CIRCUITPY must sit where it puts them.
+counterpart = "raspberrypi/adafruit_macropad_rp2040"
+
+
+# Pin names from the ports/ counterpart board's pins.c, as RP2040 QFN-56
+# package pin numbers.
+[pins]
+KEY1 = 3
+KEY2 = 4
+KEY3 = 5
+KEY4 = 6
+KEY5 = 7
+KEY6 = 8
+KEY7 = 9
+KEY8 = 11
+KEY9 = 12
+KEY10 = 13
+KEY11 = 14
+KEY12 = 15
+LED = 16
+SPEAKER_ENABLE = 17
+SPEAKER = 27
+ENCODER_SWITCH = 2
+BUTTON = 2
+ENCODER_A = 28
+ROTA = 28
+ENCODER_B = 29
+ROTB = 29
+NEOPIXEL = 30
+SDA = 31
+SCL = 32
+OLED_CS = 34
+OLED_RESET = 35
+OLED_DC = 36
+SCK = 38
+MOSI = 39
+MISO = 40

ports/zephyr-cp/boards/adafruit/macropad_rp2040_zephyr/console.overlay

@@ -0,0 +1,17 @@
+/* Applied after board.overlay in CONSOLE=1 and DEBUG=1 builds: the Zephyr
+ * console on UART1, on the STEMMA QT pins (TX on SDA/GPIO20, RX on SCL/GPIO21).
+ * board.I2C() and board.STEMMA_I2C are then not available. */
+/ {
+	chosen {
+		zephyr,console = &uart1;
+		zephyr,shell-uart = &uart1;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "disabled";
+};

ports/zephyr-cp/boards/board_aliases.cmake

@@ -26,35 +26,36 @@ macro(cp_board_alias alias target)
   endif()
 endmacro()
 
-cp_board_alias(pca10056 nrf52840dk/nrf52840)
-cp_board_alias(adafruit_feather_nrf52840_zephyr adafruit_feather_nrf52840/nrf52840/uf2)
 cp_board_alias(adafruit_clue_nrf52840_zephyr adafruit_clue_nrf52840/nrf52840/uf2)
+cp_board_alias(adafruit_feather_nrf52840_zephyr adafruit_feather_nrf52840/nrf52840/uf2)
 cp_board_alias(adafruit_feather_nrf52840_sense_zephyr adafruit_feather_nrf52840/nrf52840/sense/uf2)
-cp_board_alias(adafruit_itsybitsy_nrf52840_zephyr adafruit_itsybitsy/nrf52840)
 cp_board_alias(adafruit_feather_rp2040_zephyr adafruit_feather_rp2040/rp2040)
-cp_board_alias(renesas_ek_ra6m5 ek_ra6m5)
-cp_board_alias(renesas_ek_ra8d1 ek_ra8d1)
-cp_board_alias(renesas_da14695_dk_usb da14695_dk_usb)
+cp_board_alias(adafruit_itsybitsy_nrf52840_zephyr adafruit_itsybitsy/nrf52840)
+cp_board_alias(adafruit_macropad_rp2040_zephyr adafruit_macropad_rp2040/rp2040)
 cp_board_alias(native_native_sim native_sim/native)
 cp_board_alias(native_native_sim_asan native_sim/native)
 cp_board_alias(native_native_sim_lfs native_sim/native)
 cp_board_alias(native_nrf5340bsim nrf5340bsim/nrf5340/cpuapp)
 cp_board_alias(native_nrf54lm20bsim nrf54lm20bsim/nrf54lm20a/cpuapp)
+cp_board_alias(nordic_nrf5340dk nrf5340dk/nrf5340/cpuapp)
+cp_board_alias(nordic_nrf54h20dk nrf54h20dk/nrf54h20/cpuapp)
 cp_board_alias(nordic_nrf54l15dk nrf54l15dk/nrf54l15/cpuapp)
 cp_board_alias(nordic_nrf54l15tag nrf54l15tag/nrf54l15/cpuapp)
 cp_board_alias(nordic_nrf54lm20dk nrf54lm20dk/nrf54lm20a/cpuapp)
-cp_board_alias(nordic_nrf54h20dk nrf54h20dk/nrf54h20/cpuapp)
-cp_board_alias(nordic_nrf5340dk nrf5340dk/nrf5340/cpuapp)
 cp_board_alias(nxp_frdm_mcxn947 frdm_mcxn947/mcxn947/cpu0)
 cp_board_alias(nxp_frdm_rw612 frdm_rw612)
 cp_board_alias(nxp_mimxrt1170_evk mimxrt1170_evk@A/mimxrt1176/cm7)
-cp_board_alias(st_stm32h7b3i_dk stm32h7b3i_dk)
-cp_board_alias(st_stm32h750b_dk stm32h750b_dk/stm32h750xx/ext_flash_app)
-cp_board_alias(st_stm32wba65i_dk1 stm32wba65i_dk1)
-cp_board_alias(st_nucleo_u575zi_q nucleo_u575zi_q/stm32u575xx)
+cp_board_alias(pca10056 nrf52840dk/nrf52840)
 cp_board_alias(raspberrypi_rpi_pico_zephyr rpi_pico/rp2040)
 cp_board_alias(raspberrypi_rpi_pico_w_zephyr rpi_pico/rp2040/w)
 cp_board_alias(raspberrypi_rpi_pico2_zephyr rpi_pico2/rp2350a/m33)
 cp_board_alias(raspberrypi_rpi_pico2_w_zephyr rpi_pico2/rp2350a/m33/w)
-cp_board_alias(st_nucleo_n657x0_q nucleo_n657x0_q/stm32n657xx)
+cp_board_alias(renesas_da14695_dk_usb da14695_dk_usb)
+cp_board_alias(renesas_ek_ra6m5 ek_ra6m5)
+cp_board_alias(renesas_ek_ra8d1 ek_ra8d1)
 cp_board_alias(silabs_siwx917_dk2605a siwx917_dk2605a)
+cp_board_alias(st_nucleo_n657x0_q nucleo_n657x0_q/stm32n657xx)
+cp_board_alias(st_nucleo_u575zi_q nucleo_u575zi_q/stm32u575xx)
+cp_board_alias(st_stm32h750b_dk stm32h750b_dk/stm32h750xx/ext_flash_app)
+cp_board_alias(st_stm32h7b3i_dk stm32h7b3i_dk)
+cp_board_alias(st_stm32wba65i_dk1 stm32wba65i_dk1)

ports/zephyr-cp/zephyr-config/west.yml

@@ -10,7 +10,7 @@ manifest:
       path: modules/bsim_hw_models/nrf_hw_models
     - name: mcuboot
       url: https://github.com/adafruit/adaboot
-      revision: a6f8f35a36f6363b3c24b1b3d89b7f7846983c4e
+      revision: 298d868d9534a705605744dea5899a4d35fdd70e
       path: bootloader/mcuboot
     - name: zephyr
       url: https://github.com/adafruit/zephyr