Skip to content

[h264_mmal @ 0xa882cba0] MMAL error 2 on control port #33

Closed
Closed
[h264_mmal @ 0xa882cba0] MMAL error 2 on control port#33

Description

@alatteri
alatteri
opened on Aug 22, 2019

RPi4 running latest Raspbian Buster.
UV compiled from Master. FFMPEG provided by OS.

vcgencmd codec_enabled H264

root@splashpi:~# ffmpeg
ffmpeg version 4.1.4-1+rpt1~deb10u1 Copyright (c) 2000-2019 the FFmpeg developers
  built with gcc 8 (Raspbian 8.3.0-6+rpi1)
  configuration: --prefix=/usr --extra-version='1+rpt1~deb10u1' --toolchain=hardened --libdir=/usr/lib/arm-linux-gnueabihf --incdir=/usr/include/arm-linux-gnueabihf --arch=arm --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
  libavutil      56. 22.100 / 56. 22.100
  libavcodec     58. 35.100 / 58. 35.100
  libavformat    58. 20.100 / 58. 20.100
  libavdevice    58.  5.100 / 58.  5.100
  libavfilter     7. 40.101 /  7. 40.101
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  3.100 /  5.  3.100
  libswresample   3.  3.100 /  3.  3.100
  libpostproc    55.  3.100 / 55.  3.100
Hyper fast Audio and Video encoder

ffmpeg -codecs | grep mmal
 DEV.LS h264                 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (decoders: h264 h264_v4l2m2m h264_mmal ) (encoders: libx264 libx264rgb h264_omx h264_v4l2m2m h264_vaapi )

ffmpeg -decoders | grep mmal
 V..... h264_mmal            h264 (mmal) (codec h264)
 V..... mpeg2_mmal           mpeg2 (mmal) (codec mpeg2video)
 V..... mpeg4_mmal           mpeg4 (mmal) (codec mpeg4)
 V..... vc1_mmal             vc1 (mmal) (codec vc1)

root@testpi:~# uv --param force-lavd-decoder=h264_mmal -d sdl 
UltraGrid 1.5+ (tags/nightly rev 98c909e7 built Aug 22 2019 03:55:01)

Display device   : sdl
Capture device   : none
Audio capture    : none
Audio playback   : none
MTU              : 1500 B
Video compression: none
Audio codec      : PCM
Network protocol : UltraGrid RTP
Audio FEC        : none
Video FEC        : none

Created new RTP session with SSRC 0x039e601d.
[SDL] Using driver: x11
SDL2 initialized successfully.
Display initialized-sdl
Video capture initialized-none
Created new RTP session with SSRC 0x72c047a6.
[SDL] Reconfigure to size 512x512
[video dec.] New incoming video format detected: 1920x1080 @30.00p, codec H.264
**[lavd] Unable to open decoder h264_mmal.**
[lavd] Using decoder: h264

[lavd]  Error while decoding frame (rc == -1313558101): Unknown error occurred.
[h264_mmal @ 0xa882cba0] MMAL error 2 on control port
[h264_mmal @ 0xa882cba0] MMAL error 2 on control port
[h264_mmal @ 0xa882cba0] MMAL error 2 on control port
[h264_mmal @ 0xa882cba0] MMAL error 2 on control port
[h264_mmal @ 0xa882cba0] MMAL error 2 on control port
[h264_mmal @ 0xa882cba0] MMAL error 2 on control port
[h264_mmal @ 0xa882cba0] Did not get output frame from MMAL.
[lavd]  Error while decoding frame (rc == -1313558101): Unknown error occurred.

without MMAL video does play, but really low frame rate. With MMAL, fails.

Activity

  1. alatteri commented on Aug 22, 2019

    @alatteri
    alatteri
    on Aug 22, 2019
    Author

    Using App Image, get the same thing.

    root@splashpi:~# ./UltraGrid-20190821.glibc2.24-armhf.AppImage --tool uv -d sdl --param force-lavd-decoder=h264_mmal
UltraGrid 1.5+ (master rev 5cd05268 built Aug 21 2019 04:54:23)

Display device   : sdl
Capture device   : none
Audio capture    : none
Audio playback   : none
MTU              : 1500 B
Video compression: none
Audio codec      : PCM
Network protocol : UltraGrid RTP
Audio FEC        : none
Video FEC        : none

Created new RTP session with SSRC 0x4f71b38a.
[SDL] Using driver: x11
SDL2 initialized successfully.
Display initialized-sdl
Video capture initialized-none
Created new RTP session with SSRC 0x164bb7b7.
[SDL] Reconfigure to size 512x512
[video dec.] New incoming video format detected: 1920x1080 @30.00p, codec H.264
[SDL] Using renderer: opengl
[lavd] Decoder not found: h264_mmal
[lavd] Using decoder: h264

  2. alatteri commented on Aug 24, 2019

    @alatteri
    alatteri
    on Aug 24, 2019
    Author

    did a re-install of Raspian Full. It now tries to use h264_mmal but fails with this:

    [video dec.] Successfully reconfigured display to 1920x1080 @30.00p, codec UYVY
    [lavd] Using decoder: h264_mmal
    [video dec.] Successfully reconfigured display to 1920x1080 @30.00p, codec UYVY
    [lavd] Using decoder: h264_mmal
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.

  3. MartinPulec commented on Aug 30, 2019

    @MartinPulec
    MartinPulec
    on Aug 30, 2019
    Collaborator

    Hi, after several tries I make the MMAL decoding somehow work - setting gpu_mem=128 to config.txt (i. a. here; can be done with raspi-config) and using the Raspberry PI default DE worked for me. Xorg with Openbox started directly from console did give me the error even with increased GPU memory, IIRC.

    However, the performance is not so good, so I'd have some questions for you – which device you use? If RPI 4 (I currently use 3B), would it be possible for you to do some tests? Since I don't think that the main problem is with decoding but rather displaying, I'd like to ask you whether you could try a playback of arbitrary H.264 1080p video with mpv and ffmpeg (ffplay).

    Just shortly - for me, both distro mpv and FFMPEG perform quite poorly with default parameters. Omxplayer, on the other hand, worked fine. I'd suspect that using the accelerated decoding is not the main problem, the bottleneck may be perhaps feeding the uncompressed video to the GPU (no matter how decoded).

    Thanks,
    Martin

  4. alatteri commented on Sep 2, 2019

    @alatteri
    alatteri
    on Sep 2, 2019
    Author

    Hi Martin,

    Fresh install of Raspian Buster Full on RPi4 (4GB). gpu_mem=512

    I made a 1920x1080 H264 file from one of my un-compressed sources, using HandBrake defaults (expect for fps, set that to Source).

    Omxplayer is very clean, perfect playback, almost no CPU usage.

    ffplay -vcodec h264_mmal: 100% CPU lots of tearing
    mpv was basically the same.

    UV using nightly AppImage -d sdl --param force-lavd-decoder=h264_mmal

    [video dec.] Successfully reconfigured display to 1920x1080 @30.00p, codec UYVY
    [lavd] Using decoder: h264_mmal
    [video dec.] Successfully reconfigured display to 1920x1080 @30.00p, codec UYVY
    [lavd] Using decoder: h264_mmal
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.
    [lavd] Error while decoding frame (rc == -11): Resource temporarily unavailable.

  5. CESNET
    deleted a comment from magdesign on Mar 11, 2020

  6. alatteri commented on Sep 10, 2020

    @alatteri
    alatteri
    on Sep 10, 2020
    Author

    Pi is no longer in my use case. Closing.

  7. alatteri
    closed this as completedon Sep 10, 2020
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

No one assigned

    Labels

    No labels
    No labels

    Type

    No type

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions