Repository navigation
docs: Apollo mmWave install and updates on HACS and the 2026.11 Marketplace, phone reload steps, MTR-1 mounting, MSR Reduce DB Reporting - #1202
Conversation
…tplace, phone reload steps, MTR-1 mounting, MSR Reduce DB Reporting Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
Warning Review limit reachedYou've used all free OSS reviews for now. Wait for the free limit to reset to keep reviewing this public repository. Next included review available in 54 minutes. View limit details
 |
| Layer / File(s) | Summary |
|---|---|
Marketplace installation and updates docs/products/general/setup/apollo-mmwave-dashboard-setup.md, docs/products/{msr1,msr2,mtr1,rpro1}/setup/apollo-mmwave-dashboard-setup.md |
The setup guide distinguishes Marketplace and HACS installation steps and adds update, rollback, and card-refresh guidance. Product page descriptions list both installers. |
Repository migration and troubleshooting docs/products/general/setup/apollo-mmwave-dashboard-setup.md |
The migration procedure is limited by Home Assistant version. Troubleshooting now covers Marketplace installations and Home Assistant app refresh steps. |
Radar sensor setup guidance
| Layer / File(s) | Summary |
|---|---|
Timeout and sensor reporting guidance docs/products/msr1/setup/sensor-definitions.md, docs/products/msr2/setup/msr2-sensor-definitions.md, docs/products/mtr1/setup/sensor-definitions.md |
The guides clarify timeout defaults and behavior, distance readings when targets are absent, and the effects of Reduce DB Reporting. |
Mounting and sensitivity guidance docs/products/mtr1/faq.md, docs/products/mtr1/setup/general-tips.md |
The MTR-1 guidance describes mounting and reflection effects, zone placement, and alternatives to sensitivity adjustment. |
Zone mode selection docs/products/mtr1/setup/zones-hlk.md, docs/products/rpro1/setup/zones-hlk.md |
The guides recommend zone modes based on whether users use the dashboard zone map or the radar app’s areas. |
Estimated code review effort: 3 (Moderate) | ~20 minutes
Change: Other
Possibly related PRs
- ApolloAutomation/docs#1201: Documents 2.4.0 zone-map behavior and upgrade or rollback details in the same setup guide.
- ApolloAutomation/docs#1197: Establishes setup and zone-map guidance that this update revises.
Merge Risk: 
e1ef3
-
The documentation can mislead users about when moving and still presence indicators clear. Correcting this localized wording is recommended; the remaining evidence indicates low merge risk.
Pre-merge checks: 
-
Check name Status Explanation Description Check Check skipped - CodeRabbit’s high-level summary is enabled. Title check The title accurately summarizes the main documentation changes: Apollo mmWave installation and updates for HACS and the 2026.11 Marketplace, phone reload steps, MTR-1 mounting guidance, and MSR Reduce… Docstring Coverage No eligible functions found in the changed files. Skipping docstring coverage check. Docstring coverage is scoped to functions touched by this diff with cyclomatic complexity of at least 2. Documentat… Linked Issues check Check skipped because no linked issues were found for this pull request. Out of Scope Changes check Check skipped because no linked issues were found for this pull request. Full details: Title check
-
Explanation
The title accurately summarizes the main documentation changes: Apollo mmWave installation and updates for HACS and the 2026.11 Marketplace, phone reload steps, MTR-1 mounting guidance, and MSR Reduce DB Reporting guidance. It is specific and clearly related to the changeset, although detailed.
Full details: Docstring Coverage
-
Explanation
No eligible functions found in the changed files. Skipping docstring coverage check. Docstring coverage is scoped to functions touched by this diff with cyclomatic complexity of at least 2. Documentation-only edits and deletions within surviving functions are included; unchanged diff context and fully deleted functions are excluded. Analyzed 0 functions across 0 files. (12 skipped: 12 unsupported.)
-
Finishing Touches
-
Generate unit tests (beta)
-
- Commit to this branch
- Create a new PR
-
- Autofix · Keep fixing CodeRabbit findings and required CI, and resolving merge conflicts
Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.
A rabbit reads the setup page,
HACS and Marketplace share the stage.
The radar notes when targets fade,
And timeout tips are clearly laid.
Zones find their place; the bunny hops away.
CodeRabbit Verify
- Run CodeRabbit Verify to test the changes in this pull request.
|
@coderabbitai review |
Action performed
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
… fixes from #1202 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…otice and the MSR changes Zone map (R PRO-1 and MTR-1): - New "Zoom in and move the map" section: the minus, + and Fit row above m / ft, 1x to 8x, Ctrl or Cmd and scroll, a trackpad pinch in Chrome, Edge and Firefox, Shift or middle-button drag, two-finger pinch and pan on phones (locked maps, Walk and no zone selected too), Fit's rules, finer grid lines, when the zoom resets, and Safari's unhandled pinch. A MEDIA: zoom marker shows where the clip goes. - Corners snap to a tenth of the grid step (10 cm at 1 m, 2 in at 2 ft), Alt or Option places freely, Walk corners never snap, and the drawing readout reads to the centimeter when the snap is finer than 10 cm. - The touch readout moves beside the finger near the top of the map; a second finger drops a started rectangle or ellipse. - The wider zone map section and the height cap; the MTR-1 and R PRO-1 tab layouts with two-column sections and dense placement. - The mount-first hint under Cone rotation, the new flip hint, and the Mark corners by walking chip on phones and tablets. - Hold: someone seen in a zone for under about 1.2 s counts only within 0.3 m of an edge unless they moved at 0.85 m/s, so a couch or bed zone holds; slow walks out of view soon after entering often hold. - Zone presence waits for both halves of the radar's X and Y report, which can delay a zone up to about half a second. - A reused zone number starts with fresh generated names, but Home Assistant brings the old entity IDs back. - LD2450 Presence on LD2450 Live and Occupancy History. Tuning cards (MSR-1, MSR-2, R PRO-1 LD2412): - Gate Energy: "above threshold", faded gates outside the radar's range, the radar's own answer under the chart, and the LD2410 needs-movement line. Distances: "distance unknown". - Start here, Zone Config and Auto-calibrate now point automations at Radar Target and Radar Timeout. New troubleshooting section for Radar Target turning off while someone sits still. Setup page: the Reload and Restart notices in Load the new cards and the error-after-update entry, and 2.4.0 update notes for the presence delay and the Radar Target advice. MTR-1 FAQ #11 and the Timeout row now name 2.4.0's ignore zones and hold times alongside the 2.3.0 advice from #1202. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Wiki fixes for people on Apollo mmWave 2.3.0, needed before Home Assistant 2026.11 ships on Wednesday 2026-11-04. That release blocks the custom HACS integration and moves it into a built-in Marketplace, so every Apollo mmWave install and update step now covers both.
Marketplace and HACS (Apollo mmWave setup page and its four product copies)
hacs_repositoryMy link still works on 2026.11, and the old#install-apollo-mmwave-through-hacsanchor still resolves.Every UI string was checked against Home Assistant core 2026.11.0b3 (
components/marketplace), frontend 20261028.3 (the Marketplace panel anden.json), and HACS frontend 20250128065759 (the one HACS 2.0.5 ships).Phone reload steps
The new Load the new cards section has the restart, then Ctrl/Cmd+Shift+R on a computer, then closing the Home Assistant app fully. If a card still looks old, it gives the cache reset: Android Settings → Companion app → Troubleshooting → Reset frontend cache, or iPhone Settings → Companion app → Debugging → Clear web view cache. The other reload mentions on the page now link to it.
MTR-1
docs/assets/mtr1-corner-mount-view.svg).MSR-1 and MSR-2 sensor definitions
Checks
check_markdown, check_secrets, check_images,
mkdocs build(681 cairosvg warnings, the baseline) and check_links on the built site all pass: 683 pages, 0 broken links, 0 bad anchors.🤖 Generated with Claude Code
Summary by CodeRabbit