diff --git a/README.md b/README.md index 3fbd526a..e4333c60 100644 --- a/README.md +++ b/README.md @@ -91,6 +91,11 @@ Every item, the remote, sharing a URL from another app and **Reset**: [Usage](do Decoder has a tunnel built in, [OpenIPC camex](https://github.com/OpenIPC/camex) 3.18.0: cameras that are clients of the same camex server are watched from anywhere, without a separate VPN app. **Network** in the menu (a row under the grid) holds the server (`host:port`), the client name (the box's ID on the server), UDP or TCP, the server's public key, the pre-shared key and **On**: connect now and at every start. Off by default. The server gives the address, MTU and routes; only the tunnel network and the server's routes go through it, the local network is reached as before. The state is shown in the dialog (Connecting, Connected with the address, VPN consent needed, Failed) and in a notification. A camera reached through the tunnel plays over TCP with Auto. +

+ The Network dialog on a TV box: connected, the server and the client name + The rest of the dialog: the pre-shared key, MTU, keepalive and On +

+ The first connection asks Android for the VPN consent once (a system dialog). A device without a person at it gets the consent over adb while it is set up, with no dialog ever, and it survives reboots (no root needed): ```sh diff --git a/README.ru.md b/README.ru.md index 382ca656..24a14886 100644 --- a/README.ru.md +++ b/README.ru.md @@ -91,6 +91,11 @@ В Decoder встроен туннель [OpenIPC camex](https://github.com/OpenIPC/camex) 3.18.0: камеры, подключённые клиентами к тому же серверу camex, видны откуда угодно, без отдельного VPN-приложения. Пункт **Network** в меню (ряд под сеткой): сервер (`host:port`), имя клиента (идентификатор приставки на сервере), UDP или TCP, открытый ключ сервера, общий ключ (psk) и **On** — подключиться сейчас и при каждом запуске. По умолчанию выключено. Адрес, MTU и маршруты выдаёт сервер; через туннель идут только его сеть и маршруты сервера, локальная сеть доступна как прежде. Состояние видно в окне (Connecting, Connected с адресом, VPN consent needed, Failed) и в уведомлении. Камера за туннелем в режиме Auto идёт по TCP. +

+ Окно Network на ТВ-приставке: подключено, сервер и имя клиента + Окно ниже: общий ключ, MTU, keepalive и On +

+ При первом подключении Android один раз спрашивает согласие на VPN (системное окно). Устройству без человека рядом согласие дают через adb при настройке, без окна; оно сохраняется после перезагрузки (root не нужен): ```sh diff --git a/README.zh-CN.md b/README.zh-CN.md index 5b2146a7..d2075400 100644 --- a/README.zh-CN.md +++ b/README.zh-CN.md @@ -91,6 +91,11 @@ Decoder 内置 [OpenIPC camex](https://github.com/OpenIPC/camex) 3.18.0 隧道:作为客户端接入同一台 camex 服务器的摄像头,可以在任何地方观看,无需另装 VPN 应用。菜单中的 **Network**(网格下方一行)包含:服务器(`host:port`)、客户端名称(设备在服务器上的 ID)、UDP 或 TCP、服务器公钥、预共享密钥,以及 **On**:立即连接并在每次启动时连接。默认关闭。地址、MTU 和路由由服务器下发;只有隧道网络和服务器的路由经过隧道,本地网络照常访问。状态显示在对话框(Connecting、Connected 及地址、VPN consent needed、Failed)和通知中。经隧道访问的摄像头在 Auto 模式下走 TCP。 +

+ 电视盒子上的 Network 对话框:已连接、服务器和客户端名称 + 对话框下半部分:预共享密钥、MTU、keepalive 和 On +

+ 首次连接时 Android 会请求一次 VPN 授权(系统对话框)。无人值守的设备可在部署时通过 adb 授权,不弹对话框,重启后仍然有效(无需 root): ```sh diff --git a/screenshots/network.jpg b/screenshots/network.jpg new file mode 100644 index 00000000..2181ec81 Binary files /dev/null and b/screenshots/network.jpg differ diff --git a/screenshots/network_more.jpg b/screenshots/network_more.jpg new file mode 100644 index 00000000..6429ee17 Binary files /dev/null and b/screenshots/network_more.jpg differ