diff --git a/README.md b/README.md index 139c4a3c5..4dad9da4b 100644 --- a/README.md +++ b/README.md @@ -42,7 +42,7 @@ EC37-T11 T20L SC2232 RTL8188FU_USB MOR_16M in pr H3C TC2101 SSC337 JXQ03 RTL8188FU_USB NOR_16M done HB-WIFI-Z6 v1.2 T10 JXH62 RTL8188EU_USB NOR_8M in progress HeimVision HM202 SSC325 GC2063 RTL8188FU_USB NOR_8M video-ok, wifi-ok, ir-ok, pan/tilt-ok (74HC595) -HeimVision PE3020-W AK3918EV300 JXF37 RTL8188FU_USB NOR_8M testing, RAM-boot only (OpenIPC kernel): ISP capture-ok, ircut-ok (GPIO 42/41), no streamer +HeimVision PE3020-W AK3918EV300 JXF37 RTL8188FU_USB NOR_8M testing: flash boot ok, ISP capture-ok (OpenIPC kernel), ircut GPIO 41/42; majestic streaming not yet hardware-tested iFlytek XFP301-M T31ZX JXQ03 RTL8188FU_USB NOR_16 research Imilab EC3 CMSXJ25A SSC325 GC2053 MT7603UN_? NOR_16M in progress Dahua IPC-HFW1230SP-V2 SSC335DE GC2053 NOR_16M done diff --git a/devices/ak3918ev300_lite_heimvision-pe3020w/br-ext-chip-anyka/configs/ak3918ev300_lite_heimvision-pe3020w_defconfig b/devices/ak3918ev300_lite_heimvision-pe3020w/br-ext-chip-anyka/configs/ak3918ev300_lite_heimvision-pe3020w_defconfig index 5a503ba12..163e3bda4 100644 --- a/devices/ak3918ev300_lite_heimvision-pe3020w/br-ext-chip-anyka/configs/ak3918ev300_lite_heimvision-pe3020w_defconfig +++ b/devices/ak3918ev300_lite_heimvision-pe3020w/br-ext-chip-anyka/configs/ak3918ev300_lite_heimvision-pe3020w_defconfig @@ -62,6 +62,10 @@ BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y # BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set BR2_PACKAGE_LIBEVENT_OPENIPC=y BR2_PACKAGE_LIBOGG_OPENIPC=y +# The streamer: capture from the kernel's ISP2 host, H.264/H.265 and JPEG on +# the SoC's Allegro encoder (OpenIPC/linux#242). Its OSD is not ported, so +# no fonts. +BR2_PACKAGE_MAJESTIC=y BR2_PACKAGE_MAJESTIC_WEBUI=y BR2_PACKAGE_MBEDTLS_OPENIPC=y BR2_PACKAGE_MOTORS=y diff --git a/devices/ak3918ev300_lite_heimvision-pe3020w/general/overlay/usr/share/openipc/customizer.sh b/devices/ak3918ev300_lite_heimvision-pe3020w/general/overlay/usr/share/openipc/customizer.sh index 9269bdca6..6d7d557ec 100644 --- a/devices/ak3918ev300_lite_heimvision-pe3020w/general/overlay/usr/share/openipc/customizer.sh +++ b/devices/ak3918ev300_lite_heimvision-pe3020w/general/overlay/usr/share/openipc/customizer.sh @@ -14,7 +14,12 @@ fw_setenv wlandev rtl8188fu-generic #fw_setenv wlanssid Router #fw_setenv wlanpass 12345678 # -# IR-cut: GPIO 42 night, GPIO 41 day, each a short pulse that is driven -# back low. The image has no streamer to switch it yet. +# IR-cut: GPIO 41 pulses the filter to day and GPIO 42 to night, each driven +# back low (measured on the board, OpenIPC/builder#234). Which of Majestic's +# two pins drives which way is not confirmed on this board yet; swap them if +# the filter moves the wrong way. +cli -s .nightMode.irCutPin1 41 +cli -s .nightMode.irCutPin2 42 +cli -s .video0.codec h264 exit 0