diff --git a/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx b/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx index 83d8e246db..1e23e49bde 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.cs-CZ.resx @@ -1056,6 +1056,9 @@ First make a backup copy of your profile files before enabling encryption! Otevřít + + Open ports + Otevřít licenci @@ -2273,6 +2276,12 @@ URL: https://api.ipify.org/ Vybraný vlastní příkaz bude trvale odstraněn. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + Restart @@ -2870,11 +2879,11 @@ URL: https://api.ipify.org/ Vybraný profil portů bude trvale odstraněn. - - Vyber profil portů + + Delete port profiles - - Otevřít proily portů... + + The selected port profiles will be deleted permanently. Zobrazit úvodní obrazovku při startu @@ -5071,4 +5080,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.de-DE.resx b/Source/NETworkManager.Localization/Resources/Strings.de-DE.resx index d19caa92d9..230eedd9c9 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.de-DE.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.de-DE.resx @@ -1056,6 +1056,9 @@ Erstelle eins... Offen + + Open ports + Lizenz öffnen @@ -2274,6 +2277,12 @@ ist deaktiviert! Der ausgewählte benutzerdefinierte Befehl wird unwiederbringlich gelöscht. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + Neustart @@ -2871,11 +2880,11 @@ ist deaktiviert! Das ausgewählte Port-Profil wird unwiederbringlich gelöscht. - - Port-Profil anzeigen + + Delete port profiles - - Port-Profil öffnen... + + The selected port profiles will be deleted permanently. Zeige SplashScreen beim Starten @@ -5071,4 +5080,67 @@ Scan starten? Wenn es aufgelöst wird, existiert es. Sonst: Cache leeren. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx b/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx index b8216cc338..13c6a7b3bf 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.es-ES.resx @@ -1056,6 +1056,9 @@ Crear uno... Abrir + + Open ports + Abrir licencia @@ -2271,6 +2274,12 @@ está deshabilitada! El comando personalizado seleccionado será eliminado permanentemente. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + Reiniciar @@ -2868,11 +2877,11 @@ está deshabilitada! El perfil de puerto seleccionado será eliminado permanentemente. - - Seleccionar perfil de puerto + + Delete port profiles - - Abrir perfiles de puertos... + + The selected port profiles will be deleted permanently. Mostrar pantalla de bienvenida al inicio @@ -5068,4 +5077,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx b/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx index b0f31b531e..e0a3ff7f8e 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.fr-FR.resx @@ -1056,6 +1056,9 @@ Créez-en un… Ouvrir + + Open ports + Licence ouverte @@ -2274,6 +2277,12 @@ est désactivée! Commande personnalisée sélectionnée sera supprimée définitivement. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + Redémarrer @@ -2871,11 +2880,11 @@ est désactivée! Le profil du port sélectionné sera supprimé définitivement. - - Sélectionnez le profil du port + + Delete port profiles - - Ouvrir les profils du port... + + The selected port profiles will be deleted permanently. Afficher Écran de démarrage au démarrage @@ -5071,4 +5080,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx b/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx index 495dee2898..c7bac85efb 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.hu-HU.resx @@ -1056,6 +1056,9 @@ Create one... Open + + Open ports + Open license @@ -2274,6 +2277,12 @@ is disabled! A kiválasztott egyedi parancs véglegesen törlésre kerül. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + Újraindítás @@ -2871,11 +2880,11 @@ is disabled! The selected port profile will be deleted permanently. - - Select port profile + + Delete port profiles - - Open port profiles... + + The selected port profiles will be deleted permanently. Show SplashScreen on start @@ -5071,4 +5080,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx b/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx index 065c200cd1..d3b4b9cc85 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.it-IT.resx @@ -1067,6 +1067,9 @@ Controlla i parametri! Apri + + Open ports + Apri licenza @@ -2295,6 +2298,12 @@ Prova un altro servizio o usa quello predefinito... Il comando personalizzato selezionato verrà eliminato definitivamente. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + Riavvia @@ -2894,11 +2903,11 @@ Vedi messaggio errore: "{0}" Il seguente profilo porte verrà permanentemente eliminato! - - Seleziona profilo porte + + Delete port profiles - - Apri profilo porte... + + The selected port profiles will be deleted permanently. All'avvio visualizza schermata benvenuto @@ -5170,4 +5179,67 @@ Vuoi avviare la scansione? Se si risolve, esiste. In caso contrario, svuota la cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx b/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx index c281d7152b..f3f1f225bc 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.ja-JP.resx @@ -1056,6 +1056,9 @@ 開く + + Open ports + ライセンスを開く @@ -2274,6 +2277,12 @@ URL: https://api.ipify.org and https://api6.ipify.org 選択したカスタム コマンドは完全に削除されます。 + + Delete custom commands + + + The selected custom commands will be deleted permanently. + 再起動 @@ -2871,11 +2880,11 @@ URL: https://api.ipify.org and https://api6.ipify.org 選択したポート プロファイルは完全に削除されます。 - - ポートプロファイルの選択 + + Delete port profiles - - ポート プロファイルを開く... + + The selected port profiles will be deleted permanently. 起動時にスプラッシュスクリーンを表示 @@ -5071,4 +5080,67 @@ Cloudflareは、お客様のIPアドレスおよびネットワーク情報を 引ければ存在する。引けなければキャッシュを消せ。 + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx b/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx index 8fd17914ea..832b1cf8b6 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.ko-KR.resx @@ -1056,6 +1056,9 @@ 열기 + + Open ports + 오픈 라이선스 @@ -2271,6 +2274,12 @@ URL: https://api.ipify.org/ 선택한 사용자 지정 명령이 영구적으로 삭제됩니다. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + 다시 시작 @@ -2868,11 +2877,11 @@ URL: https://api.ipify.org/ 선택한 포트 프로필이 영구적으로 삭제됩니다. - - 포트 프로필 선택 + + Delete port profiles - - 포트 프로파일 열기... + + The selected port profiles will be deleted permanently. 시작시 시작 화면 표시 @@ -5068,4 +5077,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx b/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx index b20a15a9da..a117609872 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.lb-LU.resx @@ -1056,6 +1056,9 @@ Erstellt een... Op + + Open ports + Lizenz opmaachen @@ -2274,6 +2277,12 @@ ass deaktivéiert! De ausgewielte benotzerdefinéierte Befeel gëtt onwidderbréiflech geläscht. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + Neistart @@ -2871,11 +2880,11 @@ ass deaktivéiert! Dat ausgewielt Port-Profil gëtt onwidderbréiflech geläscht. - - Port-Profil auswielen + + Delete port profiles - - Port-Profiler opmaachen... + + The selected port profiles will be deleted permanently. SplashScreen beim Starten uweisen @@ -5071,4 +5080,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx b/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx index 47666d6ee0..ab0f888535 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.nl-NL.resx @@ -1056,6 +1056,9 @@ Creëer er een... Open + + Open ports + Open licentie @@ -2271,6 +2274,12 @@ is disabled! The selected custom command will be deleted permanently. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + Restart @@ -2868,11 +2877,11 @@ is disabled! The selected port profile will be deleted permanently. - - Select port profile + + Delete port profiles - - Open port profiles... + + The selected port profiles will be deleted permanently. Show SplashScreen on start @@ -5068,4 +5077,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx b/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx index 75ecd27996..57aec228dd 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.pl-PL.resx @@ -1056,6 +1056,9 @@ Stwórz jeden... Otwórz + + Open ports + Otwórz licencję @@ -2271,6 +2274,12 @@ jest wyłączone! Wybrana komenda niestandardowa zostanie trwale usunięta. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + Uruchom ponownie @@ -2868,11 +2877,11 @@ jest wyłączone! Wybrany profil portu zostanie trwale usunięty. - - Wybierz profil portu + + Delete port profiles - - Otwórz profile portów... + + The selected port profiles will be deleted permanently. Pokaż ekran powitalny przy uruchamianiu @@ -5068,4 +5077,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.pt-BR.resx b/Source/NETworkManager.Localization/Resources/Strings.pt-BR.resx index f78aebb292..1b43b2bf07 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.pt-BR.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.pt-BR.resx @@ -1056,6 +1056,9 @@ Crie um... Abrir + + Open ports + Abrir licença @@ -2274,6 +2277,12 @@ público está desabilitada! O comando personalizado selecionado será excluído permanentemente. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + Reiniciar @@ -2871,11 +2880,11 @@ público está desabilitada! O perfil de porta selecionado será excluído permanentemente. - - Selecionar perfil de porta + + Delete port profiles - - Abrir perfis de porta... + + The selected port profiles will be deleted permanently. Mostrar Tela de Início ao abrir @@ -5071,4 +5080,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx b/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx index 3508873e4a..5b71033581 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.ru-RU.resx @@ -1056,6 +1056,9 @@ First make a backup copy of your profile files before enabling encryption! Открытый + + Open ports + Открытая лицензия @@ -2274,6 +2277,12 @@ URL: https://api.ipify.org/ The selected custom command will be deleted permanently. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + Restart @@ -2871,11 +2880,11 @@ URL: https://api.ipify.org/ The selected port profile will be deleted permanently. - - Select port profile + + Delete port profiles - - Open port profiles... + + The selected port profiles will be deleted permanently. Show SplashScreen on start @@ -5071,4 +5080,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx b/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx index d7c9a23511..57c809f367 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.sl-SI.resx @@ -1056,6 +1056,9 @@ Ustvarite enega... Odpri + + Open ports + Odpri licenco @@ -2270,6 +2273,12 @@ je onemogočeno! Izbrani ukaz po meri bo trajno izbrisan. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + Znova zaženi @@ -2867,11 +2876,11 @@ je onemogočeno! Izbrani profil vrat bo trajno izbrisan. - - Izberi profil vrat + + Delete port profiles - - Odpri profile vrat... + + The selected port profiles will be deleted permanently. Prikaži pojavni zaslon ob zagonu @@ -5061,4 +5070,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx b/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx index 03fb50c602..2d0802e419 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.sv-SE.resx @@ -1056,6 +1056,9 @@ Create one... Open + + Open ports + Open license @@ -2271,6 +2274,12 @@ is disabled! The selected custom command will be deleted permanently. + + Delete custom commands + + + The selected custom commands will be deleted permanently. + Restart @@ -2868,11 +2877,11 @@ is disabled! The selected port profile will be deleted permanently. - - Select port profile + + Delete port profiles - - Open port profiles... + + The selected port profiles will be deleted permanently. Show SplashScreen on start @@ -5068,4 +5077,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx b/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx index 8c3cdc5ace..6debbf3a50 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.zh-CN.resx @@ -1056,6 +1056,9 @@ 打开 + + Open ports + 打开许可证 @@ -2275,6 +2278,12 @@ URL: https://api.github.com/ 所选自定义命令将被永久删除。 + + Delete custom commands + + + The selected custom commands will be deleted permanently. + 重启 @@ -2872,11 +2881,11 @@ URL: https://api.github.com/ 选定的端口配置文件将被永久删除。 - - 选择端口配置文件 + + Delete port profiles - - 打开端口配置文件... + + The selected port profiles will be deleted permanently. 在开始时显示启动画面 @@ -5072,4 +5081,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). + diff --git a/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx b/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx index 37ccfcb07b..cca75b5a92 100644 --- a/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx +++ b/Source/NETworkManager.Localization/Resources/Strings.zh-TW.resx @@ -1056,6 +1056,9 @@ 打開 + + Open ports + 打開授權 @@ -2274,6 +2277,12 @@ 所選的自訂命令將被永久刪除。 + + Delete custom commands + + + The selected custom commands will be deleted permanently. + 重新啟動 @@ -2871,11 +2880,11 @@ 所選的連接埠設定檔將被永久刪除。 - - 選擇連接埠設定檔 + + Delete port profiles - - 開啟連接埠設定檔... + + The selected port profiles will be deleted permanently. 啟動時顯示啟動畫面 @@ -5071,4 +5080,67 @@ Do you want to start the scan? If it resolves, it exists. If it doesn't, clear the cache. + + Rescan + + + Rescan host + + + {0} Closed + + + {0} Down + + + {0} Open + + + {0} Paused + + + {0} Up + + + {0} Timed out + + + Only IPv4 addresses are scanned for NetBIOS, NetBIOS doesn't exist over IPv6. + + + Adjust threads automatically + + + Adjusts the number of hosts and ports scanned at the same time to the scan: up to 512 connections at the same time, at most 128 hosts and 128 ports per host (e.g. 4 hosts with 1-1024, 128 hosts with one port). Disable it to set the threads yourself, e.g. to slow down a scan. + + + Host threads × port threads can be at most 8,192 connections at the same time (every connection uses a local port, this is half of them). Many connections at the same time may be blocked by a firewall or overload small routers. + + + Enter valid ports, port ranges (1 - 65535) and/or port profiles! + + + The name must not contain ";" and must not be a port or port range. + + + A port profile of this profile was not found, the ports saved with the profile are used. Port profiles are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the port profile and then select it in the profile again (edit the profile). + + + Ping hosts before the scan + + + Only hosts that answer a ping (ICMP echo, with the timeout and attempts above) are scanned. Faster for ranges with many unused IP addresses. Hosts that block ICMP (e.g. Windows with the firewall enabled) are not scanned. + + + {0} host(s) did not answer the ping and were not scanned. + + + Enter valid DNS servers (IP address or hostname, optional port) and/or names of DNS servers! + + + The name must not contain ";". + + + A DNS server of this profile was not found, the DNS servers saved with the profile are used. DNS servers are saved in the settings and the profile refers to them by an internal ID - if the profile file was shared from another computer, create the DNS server and then select it in the profile again (edit the profile). +